How to use the Grenco Science G-Pen Elite Weed Vaporizer.
1. Charge your device
Connect your G-Pen Elite to the provided USB cable and plug it into a wall adapter or any other USB port that provides power. Charge until full, about 2 – 3 hours. The G-Pen screen indicates the battery charge level, 4 bars means your device is fully charged!
2. Grind your weed
Using a grinder or some other method, grind your weed or flower until it is a fine consistency. The finer the better. The G-Pen holds less than two grams of ground herb, so grind up about that much.
3. Load your G-Pen
Remove the mouthpiece from your G-Pen Elite. This will expose the ceramic heating chamber of the device. Using a tool or your fingers, carefully load your ground up marijuana into the G-Pen chamber. You want the chamber to be full and lightly packed, but not too packed otherwise your airflow will be restricted. Replace the mouthpiece, sealing the chamber.
4. Turn on your G-Pen and Select Temperature
Once the mouthpiece is replaced, press the main button on the G-Pen five times to power on the G-Pen. Using the up and down arrow buttons, select a temperature between 170C and 210C. A higher temperature will hit you harder and get you higher, perfect for body pain, and when you want to maximize relaxation. A lower temperature won’t hit you as hard, and is great for day time use, anxiety, depression and ADHD.
5. Start Vaporizing Weed
After selecting the temperature that you want, activate the heat by pressing the main button for 1 second. You will see the temperature indicator start to rise and it will stop at your chosen temperature. When it does, put the G-Pen Elite mouthpiece to your lips, and inhale. You can keep taking tokes until the flavor turns to toast, or your G-Pen stops producing vapor. It is best to finish a load in one sitting, for the best flavour experience. Enjoy!
6. Power off your device
To power off your device, press the main button five times. The display will power off, indicating that your G-Pen Elite is now powered off.
7. Cleaning your device
Empty the brown, vaped weed after every session. Every 7 – 10 sessions, use a little bit of isopropanol alcohol and a pipe cleaner to clean the ceramic chamber and the mouthpiece airways.
Reviews
There are no reviews yet.